Trusted, Reliable and Affordable!

Midmark M3 UltraFast Automatic Sterilizer

$5,753.00
Write a Review
SKU:
FME-46913
Condition:
New
Shipping:
Free Shipping
Part Number:
M3-003
Please Call Us for Shipping :
866-463-3522

 

The Ritter M3 UltraFast® Automatic Sterilizer is everything you need in an autoclave. Sterilize unwrapped instruments in just 6 minutes and pouched instruments in just over 10, with the touch of a button. The M3 is the simple, intelligent and fast choice for your sterilization needs.

Features:

  • One-step loading
  • Push-button cycle selection
  • Automatic-opening door
  • Intelligent features monitor water levels for worry-free operation
  • Dries instruments in as quickly as 25 minutes
  • Top fill for convenient access to water reservoir
  • Front reservoir drain with on-board drain tube storage
  • Condensate tank with quick release lid, convenient carrying handle and water level sensor

Specifications:

  • Overall length w/plug: 22" (55.9 cm)
  • Overall width: 17.8" (45.2 cm)
  • Overall height: 6.9" (17.5 cm)
  • Countertop area: 24" (61 cm) D x 22" (55.9 cm) W
  • Chamber: 12.1" (30.7 cm) L x 7.6" (19.3 cm) W x 1.6" (4.1 cm) H
  • 0.49 gal. (1.8 liters) usable volume
  • Tray: 11.75" (29.8 cm) L x 7.25" (18.4 cm) W x 1" (2.5 cm) H
  • Holds the Hu-Friedy® Signa-Stat Cassette (6.5" x 10.5" x 1.25")
  • Unit weight: 71 lbs. (32.2 kg)
  • Unit weight with water: 80 lbs. (36.3 kg)
  • Shipping weight: 80 lbs. (36.3 kg)
  • Reservoir capacity: 1.2 gal. (4.5 liters)

Electrical Requirements:

  • 115 VAC, 50/60 Hz, 12 Amp Single Phase
  • 230 VAC, 50/60 Hz, 6 Amp Single Phase
  • Heater Power: 1400 watts
  • Maximum Power Consumption: 1400 watts
  • UL Listed to U.S. & Canadian Standards
  • ASME Boiler & Pressure Vessel Code, Section VIII, Division 1
  • Canadian Registration Number available
  • UL 61010-1, 2nd Edition
  • IEC 61010-2-040, 1st Edition
  • CAN/CSA-C22.2 No. 61010-1 2nd Edition
  • FCC Part 15, Sub-part B
  • A separate (dedicated) circuit is recommended for this sterilizer.
  • Installation: Use on a level, water-resistant surface. For proper air circulation, allow a minimum of 2" (5 cm) clearance on sides and top; 4" (10 cm) clearance behind. Allow proper clearance for access to the reservoir fill port located on top of the sterilizer. Also, allow 14" height clearance for condensate tank.

downloadpdf.png

1 Year Warranty

Have Questions?

866-463-3522 or fill out the form below